A TOUCH OF DAN WOOD CLEANER #0520
A powerful biodegradable wood cleaner that deeply removes dirt, grime, algae, mold, mildew, mill glaze and weathered greying.
- 100% pure and non-hazardous to the environment
- Mix with water to make 2 pails (10 Gallons) & clean up to 700 sq. ft. on smooth wood
- For exterior use on Cedar, Ipe, Spruce and other natural wood
- Can dissolve some worn-out wood coatings
Click below to download the Wood Cleaner Basic Instructions (PDF).
For Wood Cleaner product information about preparations, applications and more, click below to read the Product Data Sheet (PDF).
For Wood Cleaner product information about health hazards, safety precautions, first aid measures, ingredients and more, click below to read the Safety Data Sheet (PDF).
Product Uses
Our cleaner was made to be very user friendly for any house painter, contractor or a DIY project.
This is a great all around wood cleaner that won't cause damage to your garden.
It is a Ph neutral mixture that does not include bleach or any typical cleaning acids
.
The cleaner can be used as a general maintenance product or to prepare the wood before stain application.
The powder can be easily mixed with household water to create a light or strong cleaning solution depending on surface condition and wood porosity. A small sample of mixed cleaning solution should always be applied to an inconspicuous surface before continuing on a larger area. The cleaning solution strength can always be lowered by adding more water. When using on softer or unsanded wood, it is likely that stronger mixtures will produce raised grains and require some sanding when the wood has dried. Scrubbing can be mitigated if the wood has been prewashed to remove surface dirt and grime, however, tough stains or algae will almost always require some agitation.
The cleaner can be applied with a pump sprayer or soft bristle broom. Stronger cleaning solution mixtures can be too viscous to run through a pressure washer pump.
Prior to sealing or staining, it is imperative to use the Wood Conditioner after the cleaner has been completely rinsed.
All preparation and application instructions should be followed, which are found in the Product Data Sheet.
